03/04 .63 Turbo Charging Kit For 07-13 2.3 MPS Mazda 3 6 CX-7 Intercooler BOV

Brief Description :
Type: Turbo Charging Kit
Fitment: Custom Modification
Condition: 100% Brand New, Tested to meet or exceed OEM specifications
***No installation manual, professional installation highly recommended
***Customers are responsible for other related hardware modifications and ECU tuning

---

Kit Contents # :
T3/T4 Turbo Charger
Cast Iron Exhaust Manifold
2.5" 5-Bolt Downpipe Flange
Universal 2.5" Piping Set
30.5"x12"x3.0" Front Mount Intercooler
Turbo Blow Off Valve
38mm Turbo Wastegate
Oil Return Line
Oil Feed Line
Fuel Pressure Regulator
Turbo Boost Controller
Turbo Timer

---

Reference Vehicle Applications :
Year Make Model Engine Type
All Year Mazda 3 2.3L-NA Gas
All Year Mazda 5 2.3L-NA Gas
All Year Mazda 6 2.3L-NA Gas
***Vehicle applications are not limited to models showing above
Supplement Information (by manufacturer) :

---

Turbo - T3/T4 T04E .63AR
Turbo Inlet 3.00"
Turbo Outlet 2.00"
Turbine Flange T3
Downpipe Flange 2.50" 5-Bolt
Bearing Journal
Cooling Oil Cooled
Oil Inlet 1/8NPT
Turbine Air Ratio 0.63AR
Turbine Wheel Diameter 62.00mm
Compressor Air Ratio 0.50AR
Compressor Wheel Diameter 76.84mm
Exhaust Manifold - Cast Iron
Direct bolt on design, higher resistance to heat and allows power steering and air conditioner. It is good for huge horsepower increase along with improved more air flow, gain 10-15HP. T3 turbo flange fits T3 or T3/T4 turbo chargers, and fits 35MM/38MM turbo wastegates.
2.5" 5-Bolt Downpipe Flange
Made of high quality T304 stainless steel. Direct bolt on this turbo charger. You can use this flange to weld one pipe, and custom make the downpipe for this turbo kit
Universal 2.5" Piping Set
Polished aluminum piping kit. The piping kit is made of high quality T6061 aluminum. This piping kit is universal. It is not bolt on type. Customers need to cut and bent the intercooler pipe to fit your car. It has 2.5" inlet diameter, and increases more airflow. It comes with high quality 4PLY silicone couplers and strong and tighter t-bolt clamp. It can support up to 550HP
30.5"x12"x3.0" Front Mount Intercooler
Made of high quality T6061 aluminum. It is tube and fin design, high flow and light weight. It can support up to 650HP and 40PSI
Compress Air Flow Rate 700cubic feet/min
Pressure Drop 0.2-0.5 at 15PSI, 2-5 at 35PSI
Full Size 30.50"x12.00"x3.00"
Core Size 24.00"x12.00"x3.00"
Inlet 2.50"
Outlet 2.50"
Turbo Blow Off Valve
Made of high quality CNC billet aluminum and anodized finished. It includes O-ring, hardware and flange. Our blow off valves is a dual stage pull-type relief valve. Unlike typical push type blow-off valves, it will not leak under any level of boost. It is for maximum performance, incorporates both a small primary valve for ultra quick activation, and a larger secondary valve for additional discharge capacity. It is constructed of billet aluminum, which ensures long-term durability and a high luster look
38mm Turbo Wastegate
Made of high-quality CNC billet T6061 aluminum housing for heat disbursement, includes stainless steel hardware bolts, inconel base housing with forged stainless steel valves construction. Heavy duty actuator springs withstands temperatures up to 490 degrees Celsius. Set at 9PSI, adjustable spring rate with use of any boost controller
Oil Return Line
Made of high quality stainless steel braided line and T6061 aluminum fitting, helps circulate oil from the turbo to the oil pan
Length 17"
Inner Diameter 0.5"
Oil Feed Line
Made of high quality stainless steel braided line. Special designed inlet adapter limits oil flow, and effectively prevents blown oil seal caused by excessive oil pressure, comes with one 1/8 NPT male fitting and one 4AN male fitting. It has restriction build in, and offers proper oil feeding to the turbo charger
Length 36"
Inner Diameter 3/8"
Fuel Pressure Regulator
Made of high quality CNC machined aluminum. It includes hardwares and hoses for installing. It can manage your fuel system requirements, and increase fuel delivery by rasing pressure. It is adjustable 0-140 PSI(0-10kg/cm²) for maximum fuel pump capacity
Turbo Boost Controller
Made of high quality CNC machined T6061 aluminum with anodized finish. It comes with hardwares for easy installing. It is light weight design and allows you to adjust PSI ratings(1-30PSI) without changing the wastegate springs as well as replacing the wastegate springs
Turbo Timer
Designed to keep an automotive engine running for a pre-specified period of time in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. Can be programmed to leave the engine running for a per-specified period of time even after the driver has exited the vehicle

---

Legal Disclaimer :
We make no claims as to emission performance for street or highway use. Some equipment is not sold for street use in any state or country where state or federal regulations prohibit its use. Some items listed in the online catalog are intended for off road use and for purpose-built race cars only. We do not make any claims of street legal use of these products that are not intended for use on public roads.

Write a review